DOWNLOAD INFORMATION & PROGRAMMES

Download code examples, manuals, application notes, simulators, etc. All the information here is free of charge. However, the documents should not be modified or duplicated for commercial purposes without our express consent. RMV Electronics Inc. declines all responsibility emerging from the use of the information or products included in this page.

All our manuals are in Adobe's PDF or Word format. Download Adobe's Acrobat Viewer® (free).

Manuals: »

Simulators »

Application notes: »

Software: »

Manuals:

• ITC232-A manual (PDF, 238 KBytes)
• ITC232-A manual in French (PDF format, 247KBytes)
• ITC232-A manual in Spanish (PDF format, 323Bytes)
• WiZ232-A manual (PDF format, 112 KBytes)
• SPORT232 manual (PDF, 85 KBytes)
• I/O-485 manual (PDF, 549 KBytes)
• RS232/RS485 converter manual (PDF, 178 KBytes)
• CompuKit manual (PDF, 519 KBytes)
• ST series (2,3 or 4 simultaneous stepper motor) controller manual(PDF, 374 Kbytes)
• EVB manual (PDF, 34 KBytes)
• DL9 Data Logger manual (PDF, 924 KBytes)
• 10bit Analog/digital converter data sheet (link to Texas Instruments® home page)
• 12bit Analog/digital converter data sheet (link to Texas Instruments® home page)
• ST400NT User's Guide ( PDF. 319K )
• M2 ENGINE User's Guide ( PDF 124K)
• RMV856 manual (htm)

Simulators & evaluation software:

• ITC232-A simulator (autoextractable .EXE for DOS, 68 KBytes
• EVB software (Evaluation board for the ITC232-A) for Windows® (Autoextractable .ZIP 2,119 KBytes, includes the ITC232-A simulator)

Application notes:

• App note #1: Interfacing theITC232-A to microcontroller/microprocessor peripheral ICs (.PDF 11 KBytes)
• App note #2: High Speed Serial Communications Between the PC and the ITC232-A (.PDF 35 KBytes)
• App note #3: Using the ITC232-A for frequency measurement (.PDF 124 KBytes)
• App note #4: Using the ITC232-A for Period Measurement (.PDF 96 KBytes)
• App note #5: Using the ITC232-A for Pulse Counting (.PDF 98 KBytes)
• App note #6: Using the ITC232-A for Quadrature Encoded Counting (.PDF 78 KBytes)
• App note #7: Using several ITC232-A units in a RS-485 multidrop communications network (.PDF 120 KBytes)
• App note #8 was superseded by the ST series of stepper motor controllers.
• App notes #9-#19 not available.
• App note #20: Liquid level measurement using an ITC232-A (published in Electronics Design) (.PDF 217 KBytes)
• App note #21: Active filter analysis using an ITC232-A (.PDF 284 KBytes)
• App note #22: Controlling Servos with an ITC-232A (.PDF 247 KBytes)
• App note #23: Using more than one ITC232-A on the same serial port (.PDF 381 KBytes)
• App note #24: Signal conditioning for the I/O-232 and I/O-485 data acquisition boards (.PDF 148 KBytes)

Software:

• QBasic® examples for 10 and 12 bit analog/digital converter in I/O-232 and I/O-485 (Autoextractable .EXE 20 KBytes)
• Visual Basic® OCX for ITC232-A (Autoextractable.EXE 1,495 KBytes)
• ITC232-A, I/O-232, I/O-485 and ST series DLL 16 bit Ver 3.0 (Includes manual and demo Autoextractable .EXE 584 KBytes)
• ITCDLL16.DLL 16 bit (Same as above without PDF manual) (.DLL 258 KBytes)
• SPORT232 32 bit DLL (.ZIP, 198 KBytes)
• SPORT232 SOURCE CODE IN VISUAL BASIC ( ZIP 48 KBytes)
• ST series 32 bit DLL (With full demo in Delphi®)(.EXE, 268 KBytes)
• ST series 32 bit DLL with limited function demo in Visual Basic® ( Autoextractable .EXE 63 KBytes)
• ST series 32 bit DLL with limited function demo in Visual C++® (.ZIP 5,672 KBytes)
• Serial Port Interrupt Handler for the ITC232-A (Source code in C for DOS, 200 KBytes)
• New DEMO for ST400NT SERIES, ( Source code in C++ (ZIP )and example how to use the ST400NT)
• New DEMO.EXE for the M2 Engine for Windows 95/98/00,NT ( DISK1, DISK2 ( .ZIP 2526 Kbyte)
• Source Code in Visual Basic for the M2 ENGINE

Back to top »

site by,

    DMD Studio, Inc.
    We put media in motion.